| | Name | Description |
|---|
 | AccessibilityActivationPoint | (Inherited from UIKit.UIView) |
| AccessibilityCustomActions | (Inherited from UIKit.UIResponder) |
| AccessibilityElementsHidden | (Inherited from UIKit.UIView) |
| AccessibilityFrame | (Inherited from UIKit.UIView) |
| AccessibilityHint | (Inherited from UIKit.UIView) |
| AccessibilityIdentifier | (Inherited from UIKit.UIView) |
| AccessibilityLabel | (Inherited from UIKit.UIView) |
| AccessibilityLanguage | (Inherited from UIKit.UIView) |
| AccessibilityNavigationStyle | (Inherited from UIKit.UIView) |
| AccessibilityPath | (Inherited from UIKit.UIView) |
| AccessibilityTraits | (Inherited from UIKit.UIView) |
| AccessibilityValue | (Inherited from UIKit.UIView) |
| AccessibilityViewIsModal | (Inherited from UIKit.UIView) |
| ActualMaximumValue | Gets the resolved maximum value of the scale. |
| ActualMinimumValue | Gets the resolved minimum value of the scale. |
| ActualPixelScalingRatio | Gets the actual pixel scaling ratio used to affect the pixel density of the control. |
| AlignmentRectInsets | (Inherited from UIKit.UIView) |
| Alpha | (Inherited from UIKit.UIView) |
| Animating | Gets a value indicating whether the radial gauge is currently animating. |
| AutoresizingMask | (Inherited from UIKit.UIView) |
| AutosizesSubviews | (Inherited from UIKit.UIView) |
| BackgroundColor | (Inherited from UIKit.UIView) |
| BackingBrush | Gets or sets the brush to use to fill the backing of the gauge. |
| BackingCornerRadius | Gets or sets the corner rounding radius to use for the fitted scale backings. |
| BackingInnerExtent | Gets or sets the inner extent of the gauge backing. |
| BackingOuterExtent | Gets or sets the outer extent of the gauge backing. |
| BackingOutline | Gets or sets the brush to use for the outline of the backing. |
| BackingOversweep | Gets or sets the over sweep angle to apply to the backing if it is displaying fitted (in degrees). Must be greater or equal to 0. |
| BackingShape | Gets or sets the type of shape to use for the backing of the gauge. |
| BackingStrokeThickness | Gets or sets the stroke thickness of the backing outline. |
| Bounds | (Inherited from UIKit.UIView) |
| CanBecomeFirstResponder | (Inherited from UIKit.UIResponder) |
| CanResignFirstResponder | (Inherited from UIKit.UIResponder) |
| Center | (Inherited from UIKit.UIView) |
| CenterX | Gets or sets the x position of the center of the gauge with the value ranging from 0 to 1. |
| CenterY | Gets or sets the y position of the center of the gauge with the value ranging from 0 to 1. |
| Class | (Inherited from Foundation.NSObject) |
| ClassHandle | (Inherited from UIKit.UIView) |
| ClearsContextBeforeDrawing | (Inherited from UIKit.UIView) |
| ClipsToBounds | (Inherited from UIKit.UIView) |
| Constraints | (Inherited from UIKit.UIView) |
| ContentMode | (Inherited from UIKit.UIView) |
| ContentScaleFactor | (Inherited from UIKit.UIView) |
| ContentStretch | (Inherited from UIKit.UIView) |
| DebugDescription | (Inherited from Foundation.NSObject) |
| Description | (Inherited from Foundation.NSObject) |
| DuplicateLabelOmissionStrategy | Gets or sets the strategy to use for omitting labels if the first and last label have the same value. |
| ExclusiveTouch | (Inherited from UIKit.UIView) |
| Font | Returns or sets the font for the text. |
| FontBrush | Gets or sets the brush to use for the label font. |
| FontFamily | Returns or sets the font family for the text. |
| FontSize | Returns or sets the font size for the text. |
| FontStyle | Returns or sets the font style for the text. |
| Frame | (Inherited from UIKit.UIView) |
| GestureRecognizers | (Inherited from UIKit.UIView) |
| Handle | (Inherited from Foundation.NSObject) |
| HasAmbiguousLayout | (Inherited from UIKit.UIView) |
| Hidden | (Inherited from UIKit.UIView) |
| InputAccessoryView | (Inherited from UIKit.UIResponder) |
| InputAccessoryViewController | (Inherited from UIKit.UIResponder) |
| InputView | (Inherited from UIKit.UIResponder) |
| InputViewController | (Inherited from UIKit.UIResponder) |
| Interval | Gets or sets the interval to use for the scale. |
| IntrinsicContentSize | (Inherited from UIKit.UIView) |
| IsAccessibilityElement | (Inherited from UIKit.UIView) |
| IsFirstResponder | (Inherited from UIKit.UIResponder) |
| IsNeedleDraggingConstrained | Gets or sets whether the needle is constrained within the minimum and maximum value range during dragging. |
| IsNeedleDraggingEnabled | Gets or sets whether needle dragging is enabled or not. |
| IsProxy | (Inherited from Foundation.NSObject) |
| KeyCommands | (Inherited from UIKit.UIResponder) |
| LabelExtent | Gets or sets the position at which to put the labels as a value from 0 to 1, measured form the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge. |
| LabelInterval | Gets or sets the interval to use for rendering labels. This defaults to be the same interval as the tickmarks on the scale. |
| Layer | (Inherited from UIKit.UIView) |
| LayoutMargins | (Inherited from UIKit.UIView) |
| MaskView | (Inherited from UIKit.UIView) |
| MaximumValue | Gets or sets the maximum value of the scale. |
| MinimumValue | Gets or sets the minimum value of the scale. |
| MinorTickBrush | Gets or sets the brush to use for the minor tickmarks. |
| MinorTickCount | Gets or sets the number of minor tickmarks to place between major tickmarks. |
| MinorTickEndExtent | Gets or sets the position at which to stop rendering the minor tickmarks as a value from 0 to 1, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge. |
| MinorTickStartExtent | Gets or sets the position at which to start rendering the minor tickmarks as a value from 0 to 1, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge. |
| MinorTickStrokeThickness | Gets or sets the stroke thickness to use when rendering minor ticks. |
| MotionEffects | (Inherited from UIKit.UIView) |
| MultipleTouchEnabled | (Inherited from UIKit.UIView) |
| NeedleBaseFeatureExtent | Gets or sets the extent of the feature which is closest to the base (e.g. a bulb) with a value from -1 to 1. Note: Only some needle shapes respect this property, namely: NeedleWithBulb, RectangleWithBulb, TrapezoidWithBulb, and TriangleWithBulb. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge. |
| NeedleBaseFeatureWidthRatio | Gets or sets the width of the needle at its feature which is closest to the base (e.g. a bulb) with a value from 0 to 1. Note: Only some needle shapes respect this property, namely: NeedleWithBulb, RectangleWithBulb, TrapezoidWithBulb, and TriangleWithBulb. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge. |
| NeedleBrush | Gets or sets the brush to use when rendering the fill of the needle. |
| NeedleEndExtent | Gets or sets the extent (from -1 to 1) at which to end rendering the needle, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge. |
| NeedleEndWidthRatio | Gets or sets the width of the needle at its point using a value from (0 to 1). Note: Only some needle shapes respect this property. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge. |
| NeedleOutline | Gets or sets the brush to use when rendering the outline of the needle. |
| NeedlePivotBrush | Gets or sets the brush to use for filling the needle cap. Note: this only applies to certain cap shapes. |
| NeedlePivotInnerWidthRatio | Gets or sets the width of the inner cutout section of the needle cap with a value from 0 to 1. Note: Will only take effect if you have a cap set on the needle that has a cutout section. |
| NeedlePivotOutline | Gets or sets the brush to use for the outlines of the needle cap. |
| NeedlePivotShape | Gets or sets the shape to use for the needle cap. |
| NeedlePivotStrokeThickness | Gets or sets the stroke thickness to use for the outline of the needle cap. |
| NeedlePivotWidthRatio | Gets or sets the width of the cap of the needle with a value from 0 to 1. Note: Will only take effect if you have a cap set on the needle. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge. |
| NeedlePointFeatureExtent | Gets or sets the extent of the feature which is closest to the point (e.g. the tapering point of a needle) with a value from -1 to 1. Note: Only some needle shapes respect this property. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge. |
| NeedlePointFeatureWidthRatio | Gets or sets the width of the needle at its feature which is closest to the point (e.g. the tapering point of a needle) with a value from 0 to 1. Note: Only some needle shapes respect this property. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge. |
| NeedleShape | Gets or sets the shape to use when rendering the needle from a number of options. |
| NeedleStartExtent | Gets or sets the extent (from -1 to 1) at which to start rendering the needle, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge. |
| NeedleStartWidthRatio | Gets or sets the width of the needle at its point using a value from (0 to 1). Note: Only some needle shapes respect this property. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge. |
| NeedleStrokeThickness | Gets or sets the stroke thickness of the needle outline. |
| NextResponder | (Inherited from UIKit.UIResponder) |
| Opaque | (Inherited from UIKit.UIView) |
| PixelScalingRatio | Gets or sets the scaling value used to affect the pixel density of the control. |
| PreservesSuperviewLayoutMargins | (Inherited from UIKit.UIView) |
| RadiusMultiplier | Gets or sets the multiplying factor to apply to the normal radius of the gauge. The radius of the gauge is defined by the minimum of the width and height of the control divided by 2.0. This introduces a multiplicative factor to that value. |
| RangeBrushes | Gets or sets a collection of brushes to be used as the palette for gauge ranges. |
| RangeOutlines | Gets or sets a collection of brushes to be used as the palette for gauge outlines. |
| Ranges | Gets or sets the ranges to render on the gauge. |
| RestorationIdentifier | (Inherited from UIKit.UIView) |
| RetainCount | (Inherited from Foundation.NSObject) |
| ScaleBrush | Gets or sets the brush to use to fill the background of the scale. |
| ScaleEndAngle | Gets or sets the end angle for the scale in degrees. |
| ScaleEndExtent | Gets or sets the position at which to stop rendering the scale as a value from 0 to 1 measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge. |
| ScaleOversweep | Gets or sets the extra degrees of sweep to apply to the scale background. Must be greater or equal to 0. |
| ScaleOversweepShape | Gets or sets the oversweep shape to use for the excess fill area for the scale. |
| ScaleStartAngle | Gets or sets the start angle for the scale in degrees. |
| ScaleStartExtent | Gets or sets the position at which to start rendering the scale, measured from the center of the gauge as a value from 0 to 1. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge. |
| ScaleSweepDirection | Gets or sets the direction in which the scale sweeps around the center from the start angle to end angle. |
| Self | (Inherited from Foundation.NSObject) |
| ShouldGroupAccessibilityChildren | (Inherited from UIKit.UIView) |
| Subviews | (Inherited from UIKit.UIView) |
| Superclass | (Inherited from Foundation.NSObject) |
| SuperHandle | (Inherited from Foundation.NSObject) |
| Superview | (Inherited from UIKit.UIView) |
| Tag | (Inherited from UIKit.UIView) |
| TextInputContextIdentifier | (Inherited from UIKit.UIResponder) |
| TextInputMode | (Inherited from UIKit.UIResponder) |
| TickBrush | Gets or sets the brush to use for the major tickmarks. |
| TickEndExtent | Gets or sets the position at which to stop rendering the major tickmarks as a value from 0 to 1, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge. |
| TickStartExtent | Gets or sets the position at which to start rendering the major tickmarks as a value from 0 to 1, measured from the center of the gauge. Values further from zero than 1 can be used to make this extend further than the normal radius of the gauge. |
| TickStrokeThickness | Gets or sets the stroke thickness to use when rendering ticks. |
| TintAdjustmentMode | (Inherited from UIKit.UIView) |
| TintColor | (Inherited from UIKit.UIView) |
| TraitCollection | (Inherited from UIKit.UIView) |
| Transform | (Inherited from UIKit.UIView) |
| TransitionDuration | Gets or sets the number of milliseconds over which changes to the gauge should be animated. |
| TransitionEasingFunction | Gets or sets the easing function used to morph the current series. |
| TransitionProgress | Gets the transition progress of the animation when the control is animating. |
| TranslatesAutoresizingMaskIntoConstraints | (Inherited from UIKit.UIView) |
| UndoManager | (Inherited from UIKit.UIResponder) |
| UserActivity | (Inherited from UIKit.UIResponder) |
| UserInteractionEnabled | (Inherited from UIKit.UIView) |
| Value | Gets or sets the value at which to point the needle of the gauge. |
| ViewForBaselineLayout | (Inherited from UIKit.UIView) |
| ViewPrintFormatter | (Inherited from UIKit.UIView) |
| Window | (Inherited from UIKit.UIView) |
| Zone | (Inherited from Foundation.NSObject) |
